 |
FB-PP300H
White pellet
≥50
>280
2~5%
Corrugated pipe. Hollow plate
| Quantity: | |
|---|---|
Description
FB-PP300H is a flame retardant masterbatch containing bromine, phosphorus, and nitrogen in PP carrier resin.
Advantages
Environmental- and eco-friendly.
Low bromine Content.
A lower cost than the current commonly used bromine-antimony flame retardant system, since it is unnecessary to add antimony trioxide.
Comply with RoHS, REACH, PAHS, and other regulatory requirements.
Typical Properties
| Physical Properties | Unit | Target Value |
| Appearance | White Granules | |
| Water/Moisture | % | 0.2 |
| Flame Retardant Content | % | 30 |
| Decomposition Temperature | ℃ | 270 |
Usage
FB-PP300H can be used for copolymer and homopolymer PP as well as PP filler systems, such as talc and barium sulfate filling. FB-PP300H cannot be used in a calcium carbonate filling system.
Ø In PP homopolymer and PP copolymer:
For the electrical compounds to obtain the UL 94 V-2 classification from 0.8mm to 3.2mm thicknesses, a dose of 3% to 8% is typically sufficient. And the GWFI 960°C test can be passed.
Ø To meet the RoHS, REACH, PAHS and other regulatory requirements:
When the dose of FB-PP300H is less than 5%, the bromine Content is less than 900PPM, so that the modified PP material can meet the halogen-free requirements.
Packaging & Storage
Packaged in woven bags with a plastic liner. 25 kg per package.
The product is transported as non-toxic and non-hazardous goods.
The product must be kept dry and away from moisture.
Description
FB-PP300H is a flame retardant masterbatch containing bromine, phosphorus, and nitrogen in PP carrier resin.
Advantages
Environmental- and eco-friendly.
Low bromine Content.
A lower cost than the current commonly used bromine-antimony flame retardant system, since it is unnecessary to add antimony trioxide.
Comply with RoHS, REACH, PAHS, and other regulatory requirements.
Typical Properties
| Physical Properties | Unit | Target Value |
| Appearance | White Granules | |
| Water/Moisture | % | 0.2 |
| Flame Retardant Content | % | 30 |
| Decomposition Temperature | ℃ | 270 |
Usage
FB-PP300H can be used for copolymer and homopolymer PP as well as PP filler systems, such as talc and barium sulfate filling. FB-PP300H cannot be used in a calcium carbonate filling system.
Ø In PP homopolymer and PP copolymer:
For the electrical compounds to obtain the UL 94 V-2 classification from 0.8mm to 3.2mm thicknesses, a dose of 3% to 8% is typically sufficient. And the GWFI 960°C test can be passed.
Ø To meet the RoHS, REACH, PAHS and other regulatory requirements:
When the dose of FB-PP300H is less than 5%, the bromine Content is less than 900PPM, so that the modified PP material can meet the halogen-free requirements.
Packaging & Storage
Packaged in woven bags with a plastic liner. 25 kg per package.
The product is transported as non-toxic and non-hazardous goods.
The product must be kept dry and away from moisture.